Altronix 8 Output 24VDC 10 amp Power Supply

The AL1024ULACM converts 115VAC 60Hz input into 8 independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. These power outputs can be converted to dry form C contacts. Outputs are activated by an open collector sink or normally open dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including magnetic locks, electric strikes, magnetic door holders, etc. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operations and the other for lock / accessory power. A Fire Alarm Control Panel interface enables Emergency Egress, Alarm Monitoring or may be used to trigger other auxiliary devices.

Specifications:
• 24VDC @ 10 amp supply current
• 8 Access Control System trigger inputs
• 8 independently controlled outputs
• 8 Auxiliary unswitched power outputs
• Input 115VAC 60Hz rated @ 4.4 amp
• Fuses are rated at 3.5 amp
• Filtered & electronically regulated outputs
• Red LEDs indicate outputs are triggered
• Fire Alarm Disconnect is individually selectable
• Green LED indicates when Fire Alarm disconnect is triggered
• Built-In charger for lead acid or gel type batteries (batteries not included)
• Automatic switch over to stand by battery when AC fails
• AC input & DC output LED indicators
• Short circuit and thermal overload protection
• Accommodates two (2) 12AH batteries (sold separately)

Dimensions: 15.5"H x 12"W x 4.5"D
Weight: 11 lbs
Ten (10) 1/2" and 3/4" combination conduit tabs
Venting on sides provides cross-cooling

UL Listed, CUL Listed, MEA Approved & CSFM Approved

Altronix Lifetime Warranty

Additional Information

Click here for information in PDF format