Altronix 16 Output Dual Voltage Access Power Controller

Available Drop Ship Only

This unit distributes and switches power to access control systems and accessories. They convert a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC or 24VDC fuse protected outputs. These Fail-Safe/Fail-Secure power outputs may be converted to dry form C contacts. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button,REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

Specifications:
• 12VDC and/or 24VDC output
  • 12VDC @ 5.5 amp & 12VDC @ 5.5 amp
  • 24VDC @ 5.7 amp & 24VDC @ 5.7 amp
  • 12VDC @ 5.7 amp & 24VDC @ 5.7 amp
• 115VAC 60Hz, 4 amp inputs
• Input fuse rated at 3.5 amp/250V
• Maximum output current: 12VDC @ 11 amp and/or 24VDC @ 11.4 amp
• 16 access control system trigger inputs
• 16 independently controlled outputs
• 16 auxiliary power outputs
• Maximum charge current is .7 amp
• Red LEDs indicate outputs are triggered
• Fire Alarm disconnect is individually selectable for any or all of the 16 outputs
• Alarm output relay
• Greed LED indicates FACP disconnect is triggered
• Filtered and electronically regulated outputs
• Built-in charger for optional sealed lead acid or gel type batteries
• Automatic switch over to stand-by battery backup
• Thermal & short circuit protection with auto reset
• AC input and DC output LED indicators
• Enclosure accommodates up to four (4) 12AH batteries (sold separately)

Weight: 28.6 lbs
Dimensions: 26"H x 19"W x 6.25"D

Altronix Lifetime Warranty

Additional Information

Click here for information in PDF format