Alarm Lock Flush-Mounted Indoor Keypad

The A-100 is a self-contained electronic keypad designed for indoor applications where key code access is desired. It provides you with single door access control for residential or commercial environments with up to 150 user codes. The stainless steel faceplate is designed to mount on a standard single-gang electrical box for flush mounting and the security screws prevent tampering.

The A-100 accepts 3 to 6 digit user codes of which you can decide, making it easier for each user to request a specific code to help them remember their own code, or you can program just a few codes and have multiple people use the same code. The non-volatile EEPROM memory keeps the program codes even if power fails to the keypad. This keypad can operate electric strikes, magnetic locks or electrified locksets.

A built-in timer can be set for 1 to 99 seconds allowing the user enough time to open the door after the last correct digit is depressed so they don't have to rush to open the door. Audible feedback verifies each key press. Since the keypad is self-contained there is no need for a computer connection to add or remove users or to program the timer feature. All programming is done at the keypad (instructions included)

Features:
• Operating Voltage: 9VDC to 28VDC, 10VAC to 26VAC
• Typical voltage: 12 or 24V AC or DC
• Operating Temperature: -13°F to 131°F (-25°C to 55°C)
• Current Draw:
• 12VDC = 13mA (Standby) - 48mA (Active)
• 24VDC = 20mA (Standby) - 58mA (Active)
• 12VAC = 30mA (Standby) - 100mA (Active)
• 24VAC = 50mA (Standby) - 121mA (Active)
• Outputs: 2 relay/1 open-collector
• Tamper Switch Output
• Dimensions: 4-3/8"H X 3"W X 7/8"D

Indoor Use Only

Click here for further specifications